全自動消光比測試系統 詳情介紹Polarization Extinction Ratio and Axis Angle Measurement System for Polarization-Maintaining Fiber Arrays
DESCRIPTION：描述
InLine Photonics offers a measurement system for determining the polarization extinction ratio (PER) and axis angle of polarization-maintaining (PM) fiber array components, including as fiber array units (FAUs), MTP/MPO PM fiber cords, and PM fiber v-grooves. The system includes a broadband light source with MPO/APC and FC/AP C output connectors, a multi-fiber polarizing cable, a PER meter (CUBE-ER100), and a 16mm or 30mm lens c age system, together with an MPO or v-groove holder. Each component can be customized to meet the specific customer requirements.
FEATURES ：特征 (PER>40dB) | BENEFITS ：益處 across multiple channels |
?Measured PER Range >52dB ?Provides confidence in testing even the most
?Polarized Light Coupled to DUT in demanding PM fiber components
Free Space ? Enables flexible and precise sample
alignment without additional optics
?Polarization State Adjustment
Not Required ? Simplifies setup, saving time and reducing
user error
?Customizable Input Polarizers ? Adapt the system to match requirements
?Customizable Sample Holding Fixtures ?Secure and stable mounting for variety oF components
? Built-in Red Aiming Laser ?Makes alignment fast, intuitive, and user-friendly
APPLICATIONS ：應用
?Fiber Array Unit (FAU) Manufacturing ?Quality Control in PM Fiber Assembly
?MTP/MPO Patch Cord Manufacturing ?Fiber Array Unit (FAU) Process Development
MEASUREMENT SYSTEM SPECIFICATIONS ：系統參數指標
Parameters | Values |
PER measurement Range | >40dB @ -20dBm |
PER Angle Accuracy | +/-1ο (after being calibrated using angle standard) |
OLS-100M-ASE/SLD Broadband light Source | |
Light Source Type | ASE (not for 1310nm), or SLD |
Central Wavelength | 1310nm, 1550nm, 1064nm |
Linewidth | >10nm |
Short-term Optical Stability (15 minutes) | ± 0.01dB (typical), Max. ± 0.02dB |
Long-term Optical Stability (8 hours) | ± 0.05dB (typical), Max. ± 0.1dB |
Degree of Polarization | < 5% |
Output Power | -10dBm/channel |
TEC Stability | ± 0.1οC (typical), Max. ± 0.2οC |
TEC Control Range | 25οC (typical), Min. 20οC, Max. 30οC |
Optical Output for Single Fiber | FC Adapter |
Optical Output for PM Fiber Array | 12 or 24 channel MPO/MTP Adapter (Default) |
Power Supply | DC 15V/1A |
Operating Temperature | 5 to 40 οC |
Storage Temperature | -30 to 70 οC |
Dimensions | 145 (W) x 200 (D) x 54 (H) mm |
CUBE-ER100-FC-S-6 Extinction Ratio Meter | |
Operating Wavelength Range | 600 to 1600nm |
Calibration Wavelength | 630, 850, 980, 1060, 1310, 1550nm |
PER Range @ 1310 or 1550nm | 0 to 52dB for input power -5 to 11dBm @1550nm 0 to 50dB for input power -5 to 11dBm @1310nm 0 to 40dB for input power -20 to -5dBm |
PER Range @ 630, 980, or 1060nm | 0 to 40dB for input power -5 to 11dBm 0 to 35dB for input power -15 to -5dBm |
Input Adapters | FC adapter |
Optical Power Range | -65 to 11dBm @ 1310/1550nm |
PER Resolution | 0.05dB |
PER Accuracy | 0.05dB + PER*0.7% |
Angular Resolution | 0.028ο |
Absolute Angular Accuracy | 1.0 ο |
Angular Repeatability | ±0.06 ο |
Optical Power Measurement Accuracy | ±0.5dB |
Optical Power Resolution | 0.02dB |
Measurement Rate | Up to 10 measurements per sec for normal mode Up to 50 measurements per sec in tracking mode |
Measurement Mode | Continues, tracking, and manual mode |
Display | 2.42” 128 x 64 OLED graphic display |
Operating Temperature Range | 0 to 40 οC |
Storage Temperature Range | -40 to 80 οC |
Electrical Power Supply | DC 15V/1A |
Communication Interface | USB and UART |
GPIO | DB9 connector including two analog outputs, two TTL input/output triggers |
Dimensions | 63.5 (L) x 63.5 (W) x 85 (H) mm |
CUBE-ER100-A-POL- Multi CH Polarizer | |
Connector Type | MPO/MTP (input: female APC, output: male APC), Customized |
Number of Channels of MPO/MTP | 1~24 |
Extinction Ratio | > 40dB |
Fiber Length | >0.5m (typical) |
Notes: Specifications apply at ambient temperature of 23 °C ± 5 °C and relative humidity of 45% ± 15% RH, non-condensing, unless
otherwise specified.
INSTRUMENTS AND ACCESSORIES INCLUDED IN THE SYSTEM
Item/Part Number | Description | Item # |
Broadband light Source | Low-DOP ASE or SLD Light Source with MPO multiple fiber outputs and FC/APC single fiber output, built-in isolator and depolarizer | 1 |
Extinction Ratio Meter CUBE-ER100-FC-S-6 | Polarization extinction ratio meter | 2 |
Polarizing Cable | Customizable multi-channel polarizer with DUT adapter; PER > 40 dB; fiber length > 0.5 m. | 3 |
Cage System with Lens CUBE-ER100-A-LENX | 16 mm or 30 mm cage system with lens for coupling light from the DUT into the CUBE-ER100 | 4 |
Linear Translation Stage CUBE-ER100-A-XXX | Single-axis miniature translation stage with 12.7 mm travel (x2, one for X-axis and one for Y-axis) | 5 |
Customized Sample Holder CUBE-ER100-A-SHxxx | Customized sample holder | 6 |
SYSTEM DIAGRAM
TEST RESULTS OF A COMMERCIAL 12-CH PM MPO FIBER PATCH CORD
Channel | Polarization Extinction Ratio (dB) | Angle (°) |
1 | 26.5 | 2.4 |
2 | 22.8 | 1.1 |
3 | 23.5 | -0.6 |
4 | 26.6 | 0.4 |
5 | 36.0 | 0.5 |
6 | 34.8 | -0.5 |
7 | 35.9 | -0.5 |
8 | 31.9 | -1.5 |
9 | 27.4 | -3.0 |
10 | 23.2 | -1.8 |
11 | 23.1 | -0.9 |
12 | 22.8 | -1.9 |
ORDERING INFORMATION
#1: Broadband Light Source
OLS | - | 100M | - | XXX | - | CXXXX |
Product Family | Version | Type of Laser | Customised |
Example Order :OLS-100M-ASE: Standard unit with ASE light source.
#2: Extinction Ratio Meter
CUBE-ER100 | - | XX | - | X | - | X |
Product Family | Connector Type | Mode | Wavelength |
Example Order: CUBE-ER100-FC-S-6: PER Cube with FC connector, standard mode and 600 to 1,600 nm
wavelength.
#3: Polarizing Cable
CUBE-ER100 | - | A | - | POL | - | XX | - | CX |
Product Family Polarization | Accessory | Polarization Cable | Number of Channels | Connector Types C1 = MPO/MTP (default) |
Example Order: CUBE-ER100-A-POL-08-C1: Polarization cable with 8 channels and MPO connector.
#4: Cage System with Lens
CUBE-ER100 | - | A | - | LENX |
Product Family | Accessory | Lens Cage Size 16 = 16 mm |
Example Order: CUBE-ER100-A-LEN16: Cage system with lens, 16mm long.
#5: Linear Translation Stage
CUBE-ER100 | - | A | - | XXX |
Product Family | Accessory | TYPE |
Example Order: CUBE-ER100-A-LEN16: Cage system with lens, 16mm long..
#6: Customized Sample Holder
CUBE-ER100 | - | A | - | SHXXX |
Product Family | Accessory | Customer Code |
Example Order: CUBE-ER100-A-SH123: Sample holder for customer with 123 code.
